p328 electric baler welding effect
       It is very necessary to regularly check the welding effect of the machine. The welding effect can be judged by visual inspection.
       Best welding results
              The welding point must completely cover the entire 19mm width of the strapping tape, and a small amount of melted plastic may overflow on both sides for the best welding effect.
       Welding time is too short
              The welding point does not completely cover the entire width of the strapping tape. Only the middle part or the left and right sides are covered. This indicates that the welding time is too short.
       Welding time is too long
              If the welding time is too long, the strapping will overheat, and more plastic will overflow on both sides of the fused strapping, affecting the tensile effect. Some of the reasons are that the welding time is too long.