The use and main operations of OR-T260 imported baler:
            1) The machine must not be overloaded: Use the power tool suitable for your job. Using the right power tool you can work better and safer within the specified performance range.
            2) Do not use power tools with faulty switches. A power tool that can no longer be switched on or off is a hazard and must be repaired.
            3) Before making any adjustments, replacing accessories or putting away the unit, unplug it from the electrical outlet or remove the battery. This precaution prevents accidental starting of the power tool.
            4) Keep unused power tools out of the reach of children. Do not allow anyone who is unfamiliar with this machine or who has not read this manual to use this machine. It is dangerous to let inexperienced people use power tools.
            5) Carefully maintain power tools. Check that moving parts are working properly and are not pinched, and that parts are not severed or damaged, thereby impairing the functionality of the power tool. Repair damaged parts before using the machine. Many accidents are caused by poor maintenance of power tools.
            6) Keep cutting tools sharp and clean. Well-maintained cutting tools have sharp edges that are less likely to get stuck and are easier to operate.
            7) Use power tools, accessories, tools, etc. in accordance with these instructions, taking into account the working conditions and tasks to be performed. Using power tools for purposes other than those specified may result in hazardous conditions.