Orgapack electric and baler fault codes are situations that workers will encounter. When the machine fails, the backlight and fault indicator light (icon + code) on the control panel light up. In addition, a "beep" sound signal is also emitted. If the fault persists (not automatically reset), troubleshoot by removing and inserting the battery. Next, a brief introduction to the specific causes of some fault codes:

       1. E11, the icon flashes with the red indicator light
             Main cause: Inserting an impermissible battery (wrong battery), troubleshooting can be done by inserting the correct battery.
       2. E20, the icon flashes with the red indicator light
             Cause of the fault: The battery may be overheated. The fault can be rectified by letting the battery cool down, charging or replacing the battery.
       3. E24, the icon flashes with the red indicator light
             Main reason: The correct battery may not be inserted, or the wrong battery may be used. Troubleshooting can be done by inserting or charging the battery correctly.
       4. E25, the icon flashes with the red indicator light
             Main reasons: The correct battery may not be inserted, and the temperature sensor may be faulty. You can insert the battery correctly or replace the battery if necessary.
       5. E27, the icon flashes with the red indicator light
             The main reason: the battery undervoltage limit is reached or the battery is exhausted. You can recharge or replace the battery if necessary.
       The above are the main causes and troubleshooting methods of some fault codes of the orgapack electric baler. If you want to know more, you can directly call the consultation hotline 13647419800