Our country is one of the largest industrial countries in the world. With the rise of industrial construction and building materials industries, the national demand for raw materials is also increasing. Bricks, steel and other materials are an indispensable part of the building materials industry, and the demand has increased in recent years. As the real estate industry continues to develop, the production and transportation of raw materials have also become a more critical link. As for the transportation of bricks, many brick factories have now put it on the agenda. The transportation of steel has also become the most important issue for manufacturers. Steel is a heavy item. Once it falls off during transportation, the consequences and losses will be difficult to measure. So, what kind of baler should be used to pack steel? The editor of Neiwei gives the following suggestions.

      1. Use steel belt
           Packing steel pipes and steel products does not mean that steel belts must be used. Wider and thicker plastic steel belts can also be used, because the main function of the baler is to tighten the steel belts and cut them. What really works is the steel belts and steel materials. The breaking tensile strength of the baler's buckle is 80% of the belt itself. Compared with plastic steel belts, steel belts are not as stretchable, have greater hardness, and have stronger tensile strength, which can ensure that the steel does not break during transportation. It will fall and can be used for hoisting to a certain extent.

steel coil

      2. Use pneumatic baler
            There are generally two types of pneumatic steel belt balers: one is a pneumatic integrated steel belt baler, and the other is a pneumatic split steel belt baler. The pneumatic integrated steel belt baler has a heavier body, weighing 15KG, but the body is wear-resistant and the shell It is relatively strong and is more suitable for sharp products such as steel. The pneumatic split steel strapping machine tightens and cuts the straps separately. The two bodies are relatively light and easy to carry. There is no need to use hanging packaging. The machine has a large pulling force range and can be used for packaging of various specifications.

Pneumatic steel belt baler

      The pneumatic steel belt integrated baler is the most suitable product for baling steel belts. The machine has a strong shell, is not easily damaged, and has a low failure rate. It is a baler product with the highest pulling force among domestic pneumatic balers. If you want to learn more about For this product, you can leave a message on this page or call the consultation hotline 13647419800